Αναζήτηση

Προσωπικό menu

Filters

Previous productΠΕΝΣΑ Balzer Shirasu 184240...

Next productΠΕΝΣΑ CUDA 7.5" TITANIUM PL...

ΠΕΝΣΑ CUDA 7.5" TITANIUM DUAL PLIERS

DUAL CUTTING TECHNOLOGY: ΚΟΦΤΗΣ ΓΙΑ ΣΥΡΜΑ ΚΑΙ ΚΟΦΤΗΣ ΓΙΑ ΝΗΜΑ/ΜΟΝΟFILAMENT & FLUOROCARBON. ΠΕΡΙΛΑΜΒΑΝΗ ΚΑΙ ΔΕΡΜΑΤΙΝΗ ΘΗΚΗ.

Κωδικός προϊόντος: 18846

Εκδότης: CUDA

Γίνε ο πρώτος που θα αξιολόγησει αυτό το προϊόν

€118,70

Ποσότητα:

ΠΕΝΣΑ CUDA 7.5" TITANIUM DUAL PLIERS

ΜΗΚΟΣ 19cm

ΣΩΜΑ TITANIUM ALLOY
3 ΦΟΡΕΣ ΠΙΟ ΣΚΛΗΡΟ ΑΠΟ ΤΟ ΑΤΣΑΛΙ
DUAL CUTTING TECHNOLOGY: ΚΟΦΤΗΣ ΓΙΑ ΣΥΡΜΑ ΚΑΙ ΚΟΦΤΗΣ ΓΙΑ ΝΗΜΑ/ΜΟΝΟFILAMENT & FLUOROCARBON
AΝΤΙΟΛΙΣΘΗΤΙΚΟ GRIP ME ΕΞΑIΡΕΤΙΚΟ DESIGN.
ΠΕΡΙΛΑΜΒΑΝΕΙ ΔΕΡΜΑΤΙΝΗ ΧΕΙΡΟΠΟΙΗΤΗ ΘΗΚΗ.

ΤΕΧΝΟΛΟΓΙΕΣ:

Titanium Bonded®
Titanium Bonded is not painted or plated but an application of a unique formulation of titanium, chromium and nitride to the cutting blades that actually penetrates and treats the metal to create a permanent bond. The patented Titanium Bonding process provides corrosion and adhesive resistance and the process itself makes the stainless steel 3x harder than untreated stainless, providing a blade that stays sharper longer.
Aluminum Alloy
Aluminum alloys tend to be more flexible than steels so they allow better and more creative designs. Though there are aluminum alloys with somewhat higher tensile strengths than the commonly used kinds of steel. Adding aluminum in mass provides strength and rigidity. Aluminum owes its excellent corrosion resistance to the barrier oxide film that is bonded strongly to its surface and that, if damaged, re-forms immediately in most environments. Aluminum alloy is the perfect material for marine-based tools.
Cuda Grips
All Cuda fishing tools feature the "Cuda Scale Pattern". The scale pattern is important as it connects the tools to the fast and fierce ways of the barracuda and also provides and incredibly secure and comfortable grip in all environments and conditions.
Heat Inducted Blades

Heat induction is a triple-heat process. The base steel is heated, then the steel supporting the blade edges and a final heat treatment on the blade edges provides up to a62Rc. This triple-heat process is a precise heating technology to a specific area of the blades providing a stronger, longer lasting cutting edge.
Tungsten Carbide
Tungsten carbide is an inorganic chemical compound (specifically, a carbide) containing equal parts of tungsten and carbon. Tungsten carbide is approximately two times more ridged than steel and is much denser than steel or titanium. Tungsten is very abrasion resistant and can also withstand high temperatures caused by friction. Tungsten carbide tools maintain a sharp cutting edge better than other tools as they can resist high temperatures and are extremely hard.
Full Tang Construction

A full-tang is where the blade is extended throughout the handle portion of the cutting implement. Full-tang is incredibly important due to the fact that it provides strength to the cutting blade and also supports a stronger and more ridged handle.

Περιγραφή
Αξιολογήσεις
Επικοινωνία

ΠΕΝΣΑ CUDA 7.5" TITANIUM DUAL PLIERS

ΜΗΚΟΣ 19cm

ΣΩΜΑ TITANIUM ALLOY
3 ΦΟΡΕΣ ΠΙΟ ΣΚΛΗΡΟ ΑΠΟ ΤΟ ΑΤΣΑΛΙ
DUAL CUTTING TECHNOLOGY: ΚΟΦΤΗΣ ΓΙΑ ΣΥΡΜΑ ΚΑΙ ΚΟΦΤΗΣ ΓΙΑ ΝΗΜΑ/ΜΟΝΟFILAMENT & FLUOROCARBON
AΝΤΙΟΛΙΣΘΗΤΙΚΟ GRIP ME ΕΞΑIΡΕΤΙΚΟ DESIGN.
ΠΕΡΙΛΑΜΒΑΝΕΙ ΔΕΡΜΑΤΙΝΗ ΧΕΙΡΟΠΟΙΗΤΗ ΘΗΚΗ.

ΤΕΧΝΟΛΟΓΙΕΣ:

Titanium Bonded®
Titanium Bonded is not painted or plated but an application of a unique formulation of titanium, chromium and nitride to the cutting blades that actually penetrates and treats the metal to create a permanent bond. The patented Titanium Bonding process provides corrosion and adhesive resistance and the process itself makes the stainless steel 3x harder than untreated stainless, providing a blade that stays sharper longer.
Aluminum Alloy
Aluminum alloys tend to be more flexible than steels so they allow better and more creative designs. Though there are aluminum alloys with somewhat higher tensile strengths than the commonly used kinds of steel. Adding aluminum in mass provides strength and rigidity. Aluminum owes its excellent corrosion resistance to the barrier oxide film that is bonded strongly to its surface and that, if damaged, re-forms immediately in most environments. Aluminum alloy is the perfect material for marine-based tools.
Cuda Grips
All Cuda fishing tools feature the "Cuda Scale Pattern". The scale pattern is important as it connects the tools to the fast and fierce ways of the barracuda and also provides and incredibly secure and comfortable grip in all environments and conditions.
Heat Inducted Blades

Heat induction is a triple-heat process. The base steel is heated, then the steel supporting the blade edges and a final heat treatment on the blade edges provides up to a62Rc. This triple-heat process is a precise heating technology to a specific area of the blades providing a stronger, longer lasting cutting edge.
Tungsten Carbide
Tungsten carbide is an inorganic chemical compound (specifically, a carbide) containing equal parts of tungsten and carbon. Tungsten carbide is approximately two times more ridged than steel and is much denser than steel or titanium. Tungsten is very abrasion resistant and can also withstand high temperatures caused by friction. Tungsten carbide tools maintain a sharp cutting edge better than other tools as they can resist high temperatures and are extremely hard.
Full Tang Construction

A full-tang is where the blade is extended throughout the handle portion of the cutting implement. Full-tang is incredibly important due to the fact that it provides strength to the cutting blade and also supports a stronger and more ridged handle.

Νέο σχόλιο

Μόνο οι εγγεγραμμένοι χρήστες μπορούν να γράψουν σχόλια

Τίτλος:

Κείμενο:

Βαθμολογία:

Κακή
Άριστη

Ονοματεπώνυμο

Το email σας

Subject

Κείμενο

Δημοφιλεις ετικετες

Προβολή όλων

ΠΕΝΣΑ CUDA 7.5" TITANIUM DUAL PLIERS

ΠΕΝΣΑ CUDA 7.5" TITANIUM DUAL PLIERS

ΠΕΝΣΑ CUDA 7.5" TITANIUM DUAL PLIERS

Πληροφορίες

Customer Services

Ο Λογαριασμός μου

Οι προσφορές μας