Αναζήτηση

Προσωπικό menu

Filters

Previous productSIMRAD 9PIN BLACK to 7PIN B...

Next productSimrad Fluid Level Sensor

Simrad CZONE, NETWORK INTERFACE

Simrad CZONE, NETWORK INTERFACE

CZONE™ Network Bridge Interface is designed to isolate sections of the NMEA 2000 network to decrease standby current draw. Can be used for Isolation when bridging between two CAN networks, (eg connecting CZone to Simrad Simnet) or for expansion of the NMEA 2000 network, when the maximum node limit (node = any device connected to the NMEA 2000 network) for the network has been reached. Once a Bridge Interface has been fitted, a further 40 nodes can be added.

Κωδικός προϊόντος: 000-10828-001

Εκδότης: SIMRAD

Γίνε ο πρώτος που θα αξιολόγησει αυτό το προϊόν

Αρχική τιμή: €495,00

Τιμή: €470,00

Ποσότητα:

Simrad CZONE, NETWORK INTERFACE

CZONE™ Network Bridge Interface is designed to isolate sections of the NMEA 2000 network to decrease standby current draw. Can be used for Isolation when bridging between two CAN networks, (eg connecting CZone to Simrad Simnet) or for expansion of the NMEA 2000 network, when the maximum node limit (node = any device connected to the NMEA 2000 network) for the network has been reached. Once a Bridge Interface has been fitted, a further 40 nodes can be added.

Περιγραφή
Αξιολογήσεις
Επικοινωνία

Simrad CZONE, NETWORK INTERFACE

CZONE™ Network Bridge Interface is designed to isolate sections of the NMEA 2000 network to decrease standby current draw. Can be used for Isolation when bridging between two CAN networks, (eg connecting CZone to Simrad Simnet) or for expansion of the NMEA 2000 network, when the maximum node limit (node = any device connected to the NMEA 2000 network) for the network has been reached. Once a Bridge Interface has been fitted, a further 40 nodes can be added.

Νέο σχόλιο

Μόνο οι εγγεγραμμένοι χρήστες μπορούν να γράψουν σχόλια

Τίτλος:

Κείμενο:

Βαθμολογία:

Κακή
Άριστη

Ονοματεπώνυμο

Το email σας

Subject

Κείμενο

Δημοφιλεις ετικετες

Προβολή όλων